back to QD Laser main

DFB laser / DFB laser with driver

1030, 1053, 1064, 1080, 1120, 1180 nm
(1018 nm - 1122 nm, 1140 nm - 1188 nm in 1 nm step)

QLD1061 series / 1018-1122 nm & 1140-1188 nm / 14-pin butterfly package (with driver available)

Pulsed laser @ 1030nm pulse width 2-60ns, Pave: up to 1.5W and Ppeak up to 2.5kW. Control interface RS-232.

Contact an engineer

OEM
Benchtop
QLD106D series / 1064 nm / CW 50 mW / 14-pin butterfly package

Output signal linewidth <1MHz. Output power 500mW. Control interface RS-232.

Contact an engineer

OEM
Benchtop
QLD106L series / 1018-1122 nm & 1140-1188 nm / 14-pin BTF package (w/ driver available) ＊High power w/o optical isolator

Pulse width 4ns & 50ns, Pave: up to 1.2W and Ppeak up to 2.5kW, RPF 10-2000kHz. Control interface RS-232.

Contact an engineer

OEM
Benchtop
QLD106P series / 1018-1122 nm & 1140-1188 nm / 14-pin butterfly package (with driver available) ＊1 ns pulsed operation

Output power up to 1.5W. Signal linewidth <1MHz. Control interface RS-232.

Contact an engineer

OEM
Benchtop
QLD106G series / 1030 nm & 1064 nm / 7-pin SMPM module (with driver available) ＊15-20 ps pulsed operation

Output power 5 to 10W, peak power 5-10kW. PRF 200kHz-1.5MHz, pulse-width 2-8ns, energy 40uJ. Control mode: ACC and APC. Control interface RS-232 and USB.

Contact an engineer

OEM
Benchtop
QLD103E series / 1030 nm & 1064 nm / 5.6 mm TO-CAN package

Operate CW and pulsed modes, wavelengths 1030-1090nm, 25GHz line broadening, 1W output in a CW, Ppeak 5kW, 2.5ns pulse-width at 100kHz PRF. Control interface RS-232, control mode ACC & APC.

Contact an engineer

OEM
Benchtop
QLF101A series / 1060 nm / Gain chip

is a Quasi-CW (QCW) 25W pulsed fiber laser at 1064 nm. This laser delivers pulses from 250 μs to 10 ms over a wide range of repetition rates from 100 Hz to 2 kHz. With energy up to 250 mJ. This laser offers a control interface RS-232 and control mode ACC.

Contact an engineer

OEM
Benchtop